Tag Archives: performance

NW Congress: Performance

Day one of NW Congress has the custom performance classes and halter classes for OF, Hartland, and Chinas. I was so busy showing I didn’t get to take that many pictures, but I do have a few to share.

I didn’t do that well in performance in terms of placings. Competition at NW Congress is top notch, and I still have a lot to learn! This was also my first time doing these new set-ups with Troy Soldier (Nightfox is taking a well-earned rest from performance). The judge was super helpful and gave me lots of great comments, so I’m excited to try these set-ups again. She particularly loved my cowboy curtain set-up, which was really awesome to hear.

This slideshow requires JavaScript.

More pictures to come! You can also check out Tracy R.’s Picasa Album from the show.

Completing the Rider

So after casting my first halfsy-rider, I had to add back the missing parts and get her ready to go. First step was to build up her back with foil.

building rider - foil back

Next I covered that in epoxy.

Left: halfsy-rider, right: original sculpt

Left: halfsy-rider, right: original sculpt

And with several epoxy-adding sessions, she looked like a person again and was ready for paint.

building rider - drying paint

I actually decided at the last minute that her head needed to be separate so that she could look in different directions for events like jumping and trail. Now I can just plug her head into a hold drilled in the body, and it swivels.

building rider - body done

And so, after all that, I had a rider for Nightfox. And she was part of my champ winning performance run at Rose City Live.

finished rider

I’m working on several more figures right now, using the same half-cast method. I’m getting faster at the re-sculpting part, especially on those wee hands.

Right now I’m working on three figures, two riders and a walking person for showmanship and such. It’s nice to be doing a whole batch since I can work on one while epoxy dries on others.

new riders

The key here is not to lose those itty bitty heads. I’m making good use of some new little tupperwares.

New Props

My eyes are shot right now from staring at teeny tack all day, so I’m gonna blog about some props I made in the last few weeks. Tack is satisfying to make, and can be fun, but it can also be frustrating and it is hell on the eyes and neck. But props… props are just super fun all around.

Remember this arena? I was pretty stoked when I made it. And it worked just fine, and was a handy part of my performance gear for a year. But I got tired of lugging it around, especially since I was worried the dirt would come off so I always put it on top of things with nothing over it. Additionally, while it’s fun for rail set ups, it doesn’t have much space for things like trail or gaming set-ups.

new arena 1

So I hatched another plan. I wanted to keep the same interchangable fence, but with a larger, more portable, and more storable arena. I’ve been very happily using fabric as my arena base at recent shows, so I decided to go from there.

The new arena is actually super simple. It’s just a piece of hobby wood (14″ long for my minis) with holes drilled in it to accommodate the pins on the bottom of each fence. The fabric drapes over the wood and has little holes cut in it matching the drilled holes. The fences then just plug in to the holes in the wood, with the fabric in between.

new arena 2

A less than stellar picture, but you get the idea (and yes, the fabric has since been ironed)

So now I have a larger arena that is also way easier to transport and store. Compare:

new arena 3

The new arena was one of the first things I made when I got home from Rose City Live. A more recent creation is this cowboy curtain for trail.

cowboy curtain

Pretty fab huh? And as a bonus, the top piece comes off (it’s just plugged into the sides) which makes for much easier transport, AND the poles could be used in a pole bending set up! It was fun and pretty simple to make- it’s really jump hobby wood that’s been painted and glued together, with some holes drilled and some artfully cut plastic bags. Last week Robyn handed me the zebra bag as I was about to take her dog on a walk. I said no way am I putting pooh in there… I need it for projects! And I frittered it away like a little hobby squirrel.

NW Congress is only a few weeks away now… I’ve got a lot done but there’s still a lot on the To Do list. Time will tell!

How to Make Scale Jump Cups

Since I’m showing a different horse in performance at the next show, I need a different jump set up. Previously I had made jump cups and glued them to my standards- but that only allows one height of jump. I like my props to be as flexible as possible so they can be used in lots of different combinations. So I set about to make a new set of jump cups that could be reused and repositioned. And I took pictures so I could share the process.

Do note that this tutorial is only for the jump cups, not the standards. I’m using my lovely standards from Mountain Home Models. You can make your own with hobby wood, glue, and patience.

This tutorial is for stablemate scale jump cups, but could be adapted for other scales. If you’re making a traditional scale jump, I recommend that you check out this post on home made jump cups from Jennifer Buxton of Braymere Custom Saddlery and this jump cup tutorial from CK Tiny Tack.

I made the standard jump cup style, but there are numerous other styles out there that would all be accurate in for model horse performance. This is the basic style I’m going for:

Screen Shot 2013-09-29 at 9.45.35 PM

Standard jump cup from Dover

Materials for this project:

  • thin cardboard (think cereal boxes)
  • super glue
  • paint
  • wire (about 20 guage)
  • thin string like embroidery or cross stitch thread

You’ll also need a pair of small pliers and a wire cutter.

The first step is to cut your cardboard. For lack of better terminology I’m going to refer to the part that grips the standard as the wrapper. You the wrapper to cover three sides of the standard, or very close, just like in the picture of the real jump cup above.

jump cups - cardboard base

You’ll also need to cut a thinner piece to form the actual cups. This piece should be roughly the width of one side of the wrapper. Gently bend the strip around something round (for best results, use your jump poles) so that it forms the cup shape.

Use super glue to attach the bent cup to the wrapper. Bend or trim the cup as needed so that the edges are within the width of the wrapper.

jump cups - basic shape

Set the assembled cups aside to dry thoroughly.

jump cups - assembling cup

Next you can paint your cups. Jumps cups are commonly black, white, or silver, but they can come in pretty much any color you can think of. I went for the classic metal look, which I achieved with a mix of dark grey and silver. Leave the inside of the wrapper unpainted- this will make it easier to use later. But don’t forget the edges of the cardboard that will still be visible.

jump cups - painting

Next we start making the pins. In this scale, the pins don’t actually go through the standard to hold the cup on- they just look like they do.

First, bend you wire to make a tiny hook. Loop your string through the hook and hold it there as you bend the hook shut to form a loop.

jump cups - making pin

click to enlarge the image

Next, bend the wire coming off the loop so that it is straighter, like below. Glue the string to itself to attach it, and make sure it falls at a 45 degree angle to the pin. You can then trim the excess wire- the pin only needs to be a few millimeters long.

jump cups - finished pin

Then, attach the pin to the cup. This is tricky with such tiny pieces and the super glue, but don’t get discouraged if it takes a few tries. You make need to adjust the pin as it dries so it comes out of the cup straight- in the picture below it is slanting down too much.

jump cups - glued on pin

Wait for that glue to dry thoroughly before the next step. Carefully, without putting stress on the pin, bend the string around and glue it to the inside of the cup. Avoid making it lumpy as that will make the wrapper not fit your jump standard.

jump cups - glued string

To show the pin coming out of the other side of the cup, glue a tiny scrap of wire to the other side of the cup. Again, you want to make sure it is perpendicular to the wrapper.

jump cups - glued pin end

Let that dry and voila, jump cups!

jump cups - done

I recommend that you make extras, just in case a pin pops off right before your jumper class.

To affix your jump cups, just use sticky wax (the same kind you use for bits and such) on the inside of the wrappers and mold them onto the standard. Since they come on and off, you can adjust the height of your jump and make different pole combinations.

jump cups - on standard

Here’s my jump all set up with a low obstacle and my new jump flags (toothpicks, cardstock and paint). I left this set-up on the shelf overnight and neither the sticky wax or the jump cups failed.

jump cups - finished jump

Jumps are super fun to make because the combinations are endless and you can get very creative. I hope this tutorial was helpful for some folks out there making mini jumps. Got questions? Just ask!

Worth It!

So for a month there I was spending every bit of my model time on actually making horses, and blogging went by the wayside. I’m sorry about the long absence, but I’m not sorry that I worked so hard to get all that stuff finished! By the day before Rose City Live I was packed and ready to go, having accomplished my entire to-do list and even a bit extra.

The show was super fun. I missed all of the local spring shows so I hadn’t seen most of these folks since January at least. It was great to catch up and be among the awesome Region One hobbyists again :D

My half table

My table

My morning started with the custom performance division. I’d spent an extra bit of time improving my silly motorcycle costume entry, and was rewarded with Jaime’s first NAN card.

RCL13 - Jaime - Other Costume

The judge and real reference are new.

Next up I did another old-but-improved entry: my micro mini in Other Western as a bareback bronc. I was totally stunned by the win!

RCL13 - Penny Candy - bareback bronc

But what happened next was even more stunning. I was really happy to get a rider finished in time to use with Nightfox in the English division. It really helped bring my entries together!

RCL13 - Nightfox - hunter

RCL13 - Nightfox - Natural Trail

English trail, with a beautiful borrowed diorama by Mountain Home Models

Nightfox took 2nd in Hunter/Jumper, 1st in English Games, 1st in English Natural Trail, and 2nd in English Arena Trail. And that earned him the Champion English Performance horse!

RCL13 - Nightfox - English Champ

I was so excited! The judge said she thought I might faint. This is my first ever performance rosette, and my first Champion rosette. It was really awesome to win when I made the horse, tack, and rider, and planned the scenes. I felt like I worked really hard on each entry and that made the big win all the sweeter. Also big thanks to Caryn (who made the trail diorama and the jump), as well as Erin and Laura who were super supportive and helpful.

After that everything else would just be gravy, so I was stunned once more when Nightfox was named Reserve Overall Performance Champ.

RCL13 - overall perf reserve champ

*cue hyperventilation*

After the performance championship we broke for lunch. I hadn’t realized how hungry I was with all the excitement! After lunch the custom halter started. Nightfox was on a roll and took 1st in his breed class. I guess I managed to get all the sticky wax off him after all!

The afternoon rolled on and I acquired a delightful stack of NAN cards and red ribbons in halter and workmanship. There were no more blues, but I certainly wasn’t disappointed after the morning’s success! Kaylee, D’Artagnan, and Martouf all NANed for the first time.

I had so much fun at the show, and now I’m super pumped for NW Congress in October. I have big plans! And I really will be blogging about them :)